NTS 315: SEMI-AUTO DOUBLE-COLUMN COLD SAW

 
NTS 315 1.jpg
 

Pricing starts at $7,600

 
 

The Quantum NTS 315 Vertical Semi-Automatic Cold Saw has a moveable head that can move up to 45 degrees right and 60 degrees left; and the head also has rotation stops at 45° - 0° - 45° - 60°. The NTS 315 has a vice that is complete with an anti-burr device, motor pump for blade lubrication, shave breaker to keep the blade clean. This unit is equipped with a bar stop, bar support arm, and service tools, as well as the machine's manual and steel pedestal.

Electrical: The NTS 315 can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

NTS 315 CUTTING CAPACITIES AND SPECIFICATIONS:

  • Solid Round Cutting at 90° (Straight Cut) - 2.75"
  • Solid Round Cutting at 45° Right - 2.75"
  • Solid Round Cutting at 45° Left - 2.75"
  • Solid Round Cutting at 60° Left - 2.75"
  • Round Tube Cutting at 90° (Straight Cut) - 3.75"
  • Round Tube Cutting at 45° Right - 3.75"
  • Round Tube Cutting at 45° Left - 3.75"
  • Round Tube Cutting at 60° Left - 3.0"

- Maximum vice opening: 160mm (6.3")
- The NTS 315 can run at 2 different speeds: 33-66 R.P.M.

  • Square Tube Cutting at 90° (Straight Cut) - 3.50"
  • Square Tube Cutting at 45° Right - 3.50"
  • Square Tube Cutting at 45° Left - 3.50"
  • Square Tube Cutting at 60° Left - 2.75"
  • Rectangular Tube Cutting at 90° (Straight Cut) - 3.0" Height x 5.25" Width
  • Rectangular Tube Cutting at 45° Right - 3.0" Height x 3.75" Width
  • Rectangular Tube Cutting at 45° Left - 3.0" Height x 3.75" Width
  • Rectangular Tube Cutting at 60° Left - 2.75" Height x 2.75" Width

The NTS 315 is to be equipped with a 315mm blade.
(Our 315mm HSS Quantum Circular Cold Saw Blades are only $100 each!!)

Operation:
Cycle start is obtained by pressing the relevant double start button. The machine performs the following operations during the cutting cycle:
1. Vice closing and activation of blade motor
2. Cutting head down-stroke
3. Blade motor stop and return of head to initial position
4. Vice opening.


REQUEST QUOTE FOR THE NtS 315: SEMI-AUTOMATIC double-column COLD SAW

Name *
Name
Phone *
Phone
(We ask this, only to ensure that this unit will be best suited for your applications, since we offer such a wide range of saws to choose from.)

Albert Solano