Quantum Machinery NEW 350 EDV Manual Cold Saw

Quantum Machinery NEW 350 EDV Manual Cold Saw

4,300.00

The Quantum Machinery NEW 350 EDV Manual Cold Saw has a moveable head that swivels 45 degrees left and 90 degrees right. The reduction unit is in an oil bath with a double hinged pin that has an eccentric bush. The NEW 350 EDV Cold Saw is equipped with a dual quick-locking vice and a sliding counter-vice for longitudinal cutting. Has a 0.035kW power-driven pump for band cooling, along with a coolant filter. This unit is also equipped with a Jet Separation System to keep the blade oiled, has a Bar Support Arm, and a Bar Stop. Manual, service tools and steel pedestal come with the machine.

Electrical: The NEW 350 EDV can be brought in at either 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.

Add To Cart

NEW 350 EDV Cutting Capacities and Specifications:

  • Square Tube Cutting at 90 Degrees - 4"
  • Square Tube Cutting at 45 Degrees - 3.15"
  • Rectangular Tube Cutting at 90 Degrees - 4.7"W x 3.15"H
  • Rectangular Tube Cutting at 45 Degrees - 3.15"W x 3"H
  • Solid Round Cutting at 90 Degrees - 2.3"
  • Solid Round Cutting at 45 Degrees - 2.1"
  • Round Tube Cutting at 90 Degrees - 4.3"
  • Round Tube Cutting at 45 Degrees - 3.15"

Maximum vice opening - 120mm (4.7")

This saw can run at 2 different speeds (40-80 R.P.M.

The NEW 350 EDV is to be equipped with a 350mm blade. (P.s. our 350mm Quantum Blades are only $105 each!!)