Quantum Machinery NTS 315 Semi-Automatic Cold Saw

Quantum Machinery NTS 315 Semi-Automatic Cold Saw

7,300.00

The Quantum NTS 315-S Vertical Semi-Automatic Cold Saw has a moveable head that can move up to 45 degrees right and 60 degrees left; and the head also has rotation stops at 45° - 0° - 45° - 60°. The NTS 315-S has a vice that is complete with an anti-burr device, motor pump for blade lubrication, shave breaker to keep the blade clean. This unit is equipped with a bar stop, bar support arm, and service tools, as well as the machine's manual and steel pedestal.

Add To Cart

NTS 315-S Cutting Capacities and Specifications

  • Square Tube Cutting at 90° (Straight Cut) - 3.5"
  • Square Tube Cutting at 45° Right - 3.5"
  • Square Tube Cutting at 45° Left - 3.5"
  • Square Tube Cutting at 60° Left - 2.75"
  • Rectangular Tube Cutting at 90° (Straight Cut) - 3.15" Height x 5.3" Width
  • Rectangular Tube Cutting at 45° Right - 3.15" Height x 4" Width
  • Rectangular Tube Cutting at 45° Left - 3.15" Height x 4" Width
  • Rectangular Tube Cutting at 60° Left - 2.75" Height x 2.75" Width
  • Solid Round Cutting at 90° (Straight Cut) - 2.75"
  • Solid Round Cutting at 45° Right - 2.75"
  • Solid Round Cutting at 45° Left - 2.75"
  • Solid Round Cutting at 60° Left - 2.75"
  • Round Tube Cutting at 90° (Straight Cut) - 4"
  • Round Tube Cutting at 45° Right - 4"
  • Round Tube Cutting at 45° Left - 4"
  • Round Tube Cutting at 60° Left - 3.15"

Operation:
Cycle start is obtained by pressing the relevant double start button. The machine performs the following operations during the cutting cycle:
1. Vice closing and activation of blade motor
2. Cutting head down-stroke
3. Blade motor stop and return of head to initial position
4. Vice opening.

The NTS 315-S is to be equipped with a 315mm blade. (P.s. our 315mm HSS Quantum Circular Cold Saw Blades are only $90 each!!)

Maximum vice opening - 160mm (6.3")

This saw can run at 2 different speeds (33-66 R.P.M.)