Quantum Machinery Special 411 M/S Band Saw

Quantum Machinery Special 411 M/S Band Saw

8,600.00

The basic characteristics of the Special 411 M/S, such as rigidity of the blade support, flywheel dimensioning, band guides, and band stretching, have been thoroughly studied to avoid yielding of the band, increase its durability, and improve linearity and time of cutting.

Add To Cart

Special 411 M/S Cutting Capacities

  • Rectangular Tube Cutting at 90° (Straight Cut) - 7.8" Height x 15.7" Width
  • Rectangular Tube Cutting at 45° Left - 5.1" Height x 9.45" Width
  • Rectangular Tube Cutting at 45° Right - 4.3" Height x 7" Width
  • Rectangular Tube Cutting at 60° Left- 5.5" Height x 5.5" Width
  • Round Tube Cutting at 90° (Straight Cut) - 11.8"
  • Round Tube Cutting at 45° Right - 7"
  • Round Tube Cutting at 45° Left- 9.45"
  • Round Tube Cutting at 60° Left - 5.5"
  • Square Tube Cutting at 90° (Straight Cut) - 11"
  • Square Tube Cutting at 45° Left - 8.6"
  • Square Tube Cutting at 45° Right - 6.3"
  • Square Tube Cutting at 60° Left - 5.5"

Maximum Vice Opening - 400mm(15.7")
This saw can run at 2 different speeds (38-77 R.P.M.)

Here are a few notable features of the SPECIAL 411 M/S

  • Vertical rotation on bolt with adjustable tapered bearings without backlash.
  • High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw
  • Appropriately dimensioned flywheels.
  • Strong band guides with tight stress-raiser bearings and adjustable widia tips.
  • Bands stretching is obtained by electro-mechanical blade tensioner with microswitch.
  • Vice with a device for quick approach
  • Accident-preventing devices on the flywheel casing, ont the control handle and on the blade.
  • Cutting thickness 1,2 mm
  • Cutting range 45° left 60° right
  • Adjustable stop for cuts of the same size
  • Pedestal with chip collection tray and removable tank for coolant
  • Machine pre-arranged to be moved on transpallet
  • 0,06 kW power-driven pump for band cooling
  • Operation:
    Cycle start is obtained by pressing the relevant start button. The machine performs the following operations during the cutting cycle:
    1. vice closing and activation of band motor
    2. cutting bow downstroke
    3. return of bow to initial position
    4. band motor stop
    5. vice opening
  • Possibility of manual cut